Skip to main content
Loading…
This section is included in your selections.

(1) See Sections 14.02.090 (Project Plan Required) and 14.34.280 (Design Review), Provo City Code. In addition, the following specific design standards shall apply to all development in the Liberty Place PRO zone.

(2) General Building Requirements.

(a) The design of development within the Liberty Place PRO zone shall include common themes and styles in building designs. The project shall be approved by the Provo City Planning Commission prior to the issuance of a building permit.

(b) Roof shapes shall harmonize with and shall reflect the diversity of the building’s architectural character.

(c) Building materials should be durable and suitable for the design in which they are used. Natural materials such as stone, wood trim, plaster (EIFS), cement siding, wood or vinyl siding shall be used. Aluminum siding is prohibited.

(d) To the extent allowed by flood protection measures set forth in the Provo City Code or other applicable law, garages may be depressed below street grade.

(e) No trash, used materials, or wrecked or abandoned vehicles or equipment shall be stored in an open area. Storage of commercial goods or materials shall be prohibited. Containers for trash storage of a size, type and quantity approved by the City shall be screened by a sight obscuring fence and maintained in an appropriate location.

(3) Any development phase which follows the initial phase of development within the Liberty Place PRO zone shall be consistent with the design of such initial phase, as determined by the Provo City Planning Commission.

(Enacted 2011-21)